Texas-instruments TMS320C64x DSP Instrukcja Użytkownika Strona 272

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 306
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 271
Enabling VIC Port
6-5VCXO Interpolated Control PortSPRU629
6.4 Enabling VIC Port
Perform the following steps to enable the VIC port.
1) Clear the GO bit in the VIC control register (VICCTL) to 0.
2) Set the PRECISION bits in VICCTL to the desired precision.
3) Set the VIC clock divider register (VICDIV) bits to appropriate value based
on the precision and interpolation frequency.
4) Set the GO bit in VICCTL to 1.
5) The VIC input register (VICIN) is written into every time a new input code
is available for interpolation. Repeat step 3 as often as needed.
6.5 VIC Port Registers
The VIC port registers are listed in Table 63. See the device-specific data-
sheet for the memory address of these registers.
Table 63. VIC Port Registers
Acronym Register Name Section
VICCTL VIC Control Register 6.5.1
VICIN VIC Input Register 6.5.2
VICDIV
VIC Clock Divider Register 6.5.3
Enabling VIC Port / VIC Port Registers
Przeglądanie stron 271
1 2 ... 267 268 269 270 271 272 273 274 275 276 277 ... 305 306

Komentarze do niniejszej Instrukcji

Brak uwag